Polyurethaanhars prijs gieten PU voor schoenen binnenzool
Ontvang de meest recente Prijsbetaling Type: | L/C,T/T,D/P |
Incoterm: | FOB,CFR,CIF |
Min. orde: | 1000 Kilogram |
vervoer: | Ocean |
Haven: | Shanghai |
betaling Type: | L/C,T/T,D/P |
Incoterm: | FOB,CFR,CIF |
Min. orde: | 1000 Kilogram |
vervoer: | Ocean |
Haven: | Shanghai |
Model: A-2001/B-8580
merk: Xuchuan Chemical
Plaats Van Herkomst: China
Types Van: Synthetische hars en kunststoffen
Characteristic: Good handle, low density and good dimension stability, high elasticity
Appearance: liquid
Code: A-2001/B-8580
Brand: Xuchuan
Application: shoes insole
Verkoopeenheden | : | Kilogram |
Pakkettype | : | 20 & 225 kg/drum |
Afbeeldingsvoorbeeld | : |
Polyurethaan grondstoffen
Polyurethaanhars prijs gieten PU voor schoenen binnenzool
Polyol-isocyanaat voor mid-solol
Naam van producten : A-2001/B-8580
Karakteristiek: goed handvat, lage dichtheid en goede dimensiestabiliteit, hoge elasticiteit
Toepassing: Insool en lage dichtheid Mid-Sole
Application | shoes insole |
A/B Materials Temperatures (℃) | 40~45/38~42 |
A+C/B Mix ratio (By weight) | 100/74~76 |
Cream Time (s) | 7~9 |
End of Rise Time (s) | 50~60 |
Free Rise Foam Density(g/cm3) | 0.13~0.16 |
Mold Temperature (℃) | 45~55 |
Molded Density (g/cm3) | 0.30~0.40 |
Hardness (Shore C ) | 35~45 |
Tensile strength(MPa) | Tensile strength(MPa) |
Characteristic: Good handle, low density and good dimension stability, high elasticity |
|||||||
Application: Insole and low density mid-sole |
|||||||
Typical properties of PU matrix |
|||||||
Name of products |
Appearance |
Viscosity (mPa·s/40℃) |
Density (g·cm-3/40℃) |
Package(kg) |
/ |
||
A-2001 |
Liquid |
1000~1400 |
1.01~1.02 |
18 |
|||
B-8580 |
Yellowish transparent liquid or waxy |
600~1000 |
1.08~1.2 |
20 |
|||
Materials preheat |
|||||||
A-2001: preheated at 50~60℃ for 8~10 hours. |
|||||||
B-8580: preheated at 50~60℃ for 8~12 hours. |
|||||||
Typical processing parameters & Reaction parameter |
|||||||
Items |
A/B Materials Temperatures |
A+C/B Mix ratio |
Cream Time (s) |
End of Rise Time (s) |
Free Rise Foam Density(g/cm3) |
Mold Temperature |
Demold Time(min) |
Parameter |
40~45/38~42 |
100/74~76 |
7~9 |
50~60 |
0.13~0.16 |
45~55 |
4~5 |
The adding content of C-2 should be 300g±20g/18kg. |
|||||||
The adding content of water should be 0~90g/18kg according to the reality. |
|||||||
Physical properties |
|||||||
Items |
Molded Density (g/cm3) |
Hardness |
Tensile strength(MPa) |
Elongation (%) |
Tear Strength |
/ |
|
Physical properties |
0.30~0.40 |
35~45 |
4.0~6.0 |
300~380 |
18~26 |
||
Demold time may be prolonged with the increase of sole thickness |
|||||||
These physical data are acquired by testing a sample of 6mm thick. |
|||||||
|
Gegevens hierboven zijn alleen ter referentie. De detailgegevens worden onderworpen aan praktische productie. Neem contact met ons op als andere verzoeken om fysieke eigenschappen.
Xuchuan Chemical opgericht in 2007, bedrijfsgeregistreerd kapitaal is RMB 500 miljoen. De belangrijkste producten zijn allemaal reeksen polyester polyol, polyurethaanhars voor schoenen, waterbasis en oplosmiddelvrije polyurethaanharsen voor kunstleer, polyurethaanbindinglijsten en polyurethaane smeltlijsten.
Nu heeft Xuchuan 4 moderne productiebases, de productiecapaciteit bereikte 630.000 ton per jaar, producten geëxporteerd naar 32 landen en regio's ter wereld.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.